Tracking Australia’s, and indeed the international community’s, progress towards meeting major global environmental agreements and targets, such as the Sustainable Development Goals (SDGs) and The Paris Agreement, requires detailed accounts of carbon stocks and how they’re changing over time.
“We know that forest ecosystems contain more carbon biomass than any other above-ground ecosystem on the planet,” says Dr Kim Calders of Belgium’s Ghent University.
It’s estimated that Australian forests store about 10 billion tonnes of carbon, but calculating an exact figure without cutting down trees is difficult.
“Traditional methods of estimating aboveground biomass are based on volumes calculated from cut trees and expensive field measurements of tree diameter and height.”
Kim and his colleague Prof. Hans Verbeeck lead the ambitious ‘3D-FOREST’ project that aims to overcome such challenges by developing novel on-ground remote sensing techniques to measure biomass and forest structure and validate global-scale satellite measurements.
To collect vital southern hemisphere biomass data for the project, the 3D-FOREST team and their Australian government and university partners recently conducted surveys at three TERN tropical forest observing sites in Queensland and the Northern Territory. The team used a combination of on-ground and airborne LiDAR to quantify aboveground biomass and forest structure
“The concept of the project is to capture data to create ‘virtual forests’ with high-level detail,” says Kim. “The combination of ‘bottom-up’ terrestrial laser scanning (TLS) and ‘top-down’ UAV LiDAR data improves biomass estimates and knowledge on how we can upscale plot-based measurements to the landscape level.”
“Tropical forests are challenging sites to survey with UAV as we require a canopy gap for take-off and landing, as well as line-of-sight during the entire flight.”
“TERN sites offered great infrastructure such as canopy towers or canopy cranes to successfully survey using UAV methods.”
UAV LiDAR data were collected at TERN sites using the state-of-the-art RIEGL RiCOPTER operated by Dr. Harm Bartholomeus from the Netherlands’ Wageningen University, with eddy covariance flux towers providing the necessary infrastructure to successfully survey dense tropical forests using UAV methods (Imagery courtesy of Mirko Karan)
Back in the lab, virtual 3D forests created from the LiDAR data collected in the field are then ‘virtually harvested’. Quantitative structure models (QSM) digitally weigh individual trees by calculating their volume and converting this to carbon mass.
“These 3D structural metrics and biomass estimates allow us to scale-up the spatial patterns of tree structure and evenness from the 1ha plot scale to entire forests,” says Kim.
“This information is crucial for more efficient forest management, but also for better understanding of the spatial variation of forest structure in ecosystem models.”
Virtual 3D forests created from LiDAR data collected in the field (left and centre) are ‘virtually harvested’ to calculate individual tree biomass (right) (images courtesy of Kim Calders)
As Europe’s, America’s and India’s space agencies get ready to launch satellites to measure and map the planet’s forests in high-resolution 3D, the value of on-ground and UAV LiDAR data collected by Kim’s team at TERN sites is even more apparent.
The data from 3D-FOREST will be used to calibrate, validate and improve the accuracy of global bio-geophysical satellite data delivered by space missions including the European Space Agency’s BIOMASS, NASA’s GEDI, and the joint Indian Space Research Organisation and NASA NISAR.
“The ability for these space missions to scale-up estimates of forest biomass to the global carbon budget and monitor ecosystem disturbances, is dependent on the high-quality ground reference measurements collected at ecosystem research infrastructure sites, including TERN’s,” Kim says.
“The emerging methods and technologies for data collection, and the speed of their development, are truly exciting.”
The 3D-FOREST team, including Kim Calders, Louise Terryn and Barbara D’Hont (right) completed terrestrial laser scanning at three TERN ecosystem observation sites including at TERN’s Robson Creek Rainforest SuperSite (left and right)
Each TERN site was surveyed using both an approximate 9 ha area of high-density UAV LiDAR (1000+ pts/m2) and a larger 15-20 ha area of lower density UAV LiDAR (a few 100s pts/m2) (image courtesy of Mirko Karan)
Successful day of flying LiDAR and hyperspectral at @TERN_Aus @LitchfieldSSS. First RiCOPTER flights in Australia with @wurcgi and @CAVElab_UGent. Many thanks to @shaunlevick @ReneeBartolo @RIEGL @belspo! pic.twitter.com/0STSIwMPCG— Kim Calders (@kimcalders) September 12, 2018
In the past month we scanned from 583 locations in 20 scan days covering five plots and 4.5 ha of tropical Australian ecosystems. Revisiting all those sites with LiDAR and hyperspectral drones in September with @ReneeBartolo @WUR @CAVElab_UGent @belspo @TERN_Aus @RIEGL! pic.twitter.com/iNcy3hlsCt— Kim Calders (@kimcalders) August 23, 2018
Published in TERN newsletter November 2018